China Galvanized Long Link Chain/Lifting Chain manufacturer

Merchandise Description

Galvanized Alloy Metal Extended Hyperlink Chain

Substance: Alloy steel /Carbon Metal
Surface area:Galvanized/HDG/Black
Grade:43/70/80/a hundred
Bundle: Bag, Carton, Metal Pallet,Wood Scenario

Customized needs are welcome!

Origin: China
FOB Port: HangZhou
Lead time: fifteen~45 Times
Main export industry: US, Australia, European nations around the world, India
Common: CE, ISO

HangZhou CZPT also manufactures hooks, shackles, turnbuckles, wire rope clips, load binders and other rigging hardware accessories.

Positive aspects:

1.Abundant expertise for international business
2.Prompt shipping and delivery
three.Quality handle
four.Modest orders are satisfactory
5.Strong potential for R&D.
 

Measurement d Inside of Length p Outdoors WIDTH b Fat For every 100M Working LOAD BREAKING LOAD GRADE
MM MM MM KG N N
2 12 8 7 500 1250 A
22 6 C
2.5 fourteen 10 11 750 2000 A
24 ten C
3 16 12 sixteen.5 1120 2800 A
26 15 C
4 19 16 thirty 2000 5000 A
32 27 C
5 21 20 50 3150 7750 A
35 43 C
6 24 24 seventy three 4500 11500 A
42 sixty three C
7 28 28 one hundred 6000 15000 A
49 86 C
8 32 32 a hundred thirty 8000 20000 A
fifty two 110 C
9 36 36 a hundred sixty five 10000 25000 A
fifty nine 141 C
10 40 40 205 12500 31000 A
65 one hundred seventy five C
11 44 44 250 15000 38000 A
seventy two 211 C
12 48 48 290 18000 45000 A
78 255 C
13 fifty two 52 345 21200 53000 A
eighty two 295  

 

Size d Outside Length p+2nd Outside Width b Breaking Load Proof Load Bodyweight
mm mm mm min,kn min,kn kg/m
8 40 27 23.67 eleven.eight one.39
nine forty five 30 29.96 14.ninety one one.seventy six
ten 50 34 36.98 eighteen.forty four two.16
11 55 37 44.seventy five 22.32 two.65
twelve.five sixty three 43 57.fifty eight 28.81 3.four
fourteen 70 forty eight seventy two.49 36.1 four.26
sixteen eighty 54 94.68 47.21 5.56
eighteen ninety sixty 113.three 56.forty eight seven.15
19 ninety five sixty four 133.five 66.fifty eight 7.ninety seven
twenty one hundred sixty eight one hundred fifty five.39 seventy seven.5 nine.14
22 one hundred ten seventy five 179 89.27 ten.52
24 one hundred twenty eighty one 213 106.23 12.fifty two
26 130 88 278 139 fourteen.8
28 140 ninety five 321 225 17.seventeen
32 one hundred sixty 108.eight 417 291 22.43
34 a hundred and seventy a hundred and fifteen.6 544.seventy four 272.37 25.32
36 180 122.four 610.7 305.35 28.3
38 190 129 680.45 340.23 31.6
40 200 136 753.96 376.ninety eight 35.04
forty two 210 143 831.24 415.62 38.65
44 220 one hundred fifty 912.29 456.15 42.4
forty six 230 156.4 997.eleven 498.56 forty six.34
forty eight 240 163.two 1085.seven 542.85 fifty.forty six
fifty 250 170 1178.06 589.03 fifty four.seventy five

1. Can I be your agent?
Sure, welcome to deep cooperation. We have huge marketing of CZPT brand name in the market place now. For the information you should speak to me.
2. Is OEM offered?
Indeed, OEM is obtainable. We have professional designer to assist your brand advertising.
three. How can I get a sample to check your quality?
After price confirmation, you can require for samples to check our quality. Free for the samples, but you need to pay for the freight.
four. What is your top quality assure?
We have various types of merchandise which can fulfill diverse quality common.
Our QC office will teset items before transport. We have one hundred% top quality ensure to clients. We will be responsible for any high quality problem.
5. How about the delivery time?
The delivery time is depend on the products and the quantity. But generally, the delivery time for a container is about one month. 
6. What is actually gain will you provide?
Your consumer pleased on the quality.

If any query, pls truly feel free of charge to leave message on the bottom of this website page.
WELCOME YOU TO OUR Organization.

US $2.1-19
/ Meter
|
1,000 Meters

(Min. Order)

###

Usage: Transmission Chain
Material: Alloy
Surface Treatment: Electroplating
Feature: Oil Resistant
Chain Size: 1/2"*3/32"
Structure: Welded Chain

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

SIZE d INSIDE LENGTH p OUTSIDE WIDTH b WEIGHT PER 100M WORKING LOAD BREAKING LOAD GRADE
MM MM MM KG N N
2 12 8 7 500 1250 A
22 6 C
2.5 14 10 11 750 2000 A
24 10 C
3 16 12 16.5 1120 2800 A
26 15 C
4 19 16 30 2000 5000 A
32 27 C
5 21 20 50 3150 7750 A
35 43 C
6 24 24 73 4500 11500 A
42 63 C
7 28 28 100 6000 15000 A
49 86 C
8 32 32 130 8000 20000 A
52 110 C
9 36 36 165 10000 25000 A
59 141 C
10 40 40 205 12500 31000 A
65 175 C
11 44 44 250 15000 38000 A
72 211 C
12 48 48 290 18000 45000 A
78 255 C
13 52 52 345 21200 53000 A
82 295  

###

Size d Outside Length p+2d Outside Width b Breaking Load Proof Load Weight
mm mm mm min,kn min,kn kg/m
8 40 27 23.67 11.8 1.39
9 45 30 29.96 14.91 1.76
10 50 34 36.98 18.44 2.16
11 55 37 44.75 22.32 2.65
12.5 63 43 57.58 28.81 3.4
14 70 48 72.49 36.1 4.26
16 80 54 94.68 47.21 5.56
18 90 60 113.3 56.48 7.15
19 95 64 133.5 66.58 7.97
20 100 68 155.39 77.5 9.14
22 110 75 179 89.27 10.52
24 120 81 213 106.23 12.52
26 130 88 278 139 14.8
28 140 95 321 225 17.17
32 160 108.8 417 291 22.43
34 170 115.6 544.74 272.37 25.32
36 180 122.4 610.7 305.35 28.3
38 190 129 680.45 340.23 31.6
40 200 136 753.96 376.98 35.04
42 210 143 831.24 415.62 38.65
44 220 150 912.29 456.15 42.4
46 230 156.4 997.11 498.56 46.34
48 240 163.2 1085.7 542.85 50.46
50 250 170 1178.06 589.03 54.75
US $2.1-19
/ Meter
|
1,000 Meters

(Min. Order)

###

Usage: Transmission Chain
Material: Alloy
Surface Treatment: Electroplating
Feature: Oil Resistant
Chain Size: 1/2"*3/32"
Structure: Welded Chain

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

SIZE d INSIDE LENGTH p OUTSIDE WIDTH b WEIGHT PER 100M WORKING LOAD BREAKING LOAD GRADE
MM MM MM KG N N
2 12 8 7 500 1250 A
22 6 C
2.5 14 10 11 750 2000 A
24 10 C
3 16 12 16.5 1120 2800 A
26 15 C
4 19 16 30 2000 5000 A
32 27 C
5 21 20 50 3150 7750 A
35 43 C
6 24 24 73 4500 11500 A
42 63 C
7 28 28 100 6000 15000 A
49 86 C
8 32 32 130 8000 20000 A
52 110 C
9 36 36 165 10000 25000 A
59 141 C
10 40 40 205 12500 31000 A
65 175 C
11 44 44 250 15000 38000 A
72 211 C
12 48 48 290 18000 45000 A
78 255 C
13 52 52 345 21200 53000 A
82 295  

###

Size d Outside Length p+2d Outside Width b Breaking Load Proof Load Weight
mm mm mm min,kn min,kn kg/m
8 40 27 23.67 11.8 1.39
9 45 30 29.96 14.91 1.76
10 50 34 36.98 18.44 2.16
11 55 37 44.75 22.32 2.65
12.5 63 43 57.58 28.81 3.4
14 70 48 72.49 36.1 4.26
16 80 54 94.68 47.21 5.56
18 90 60 113.3 56.48 7.15
19 95 64 133.5 66.58 7.97
20 100 68 155.39 77.5 9.14
22 110 75 179 89.27 10.52
24 120 81 213 106.23 12.52
26 130 88 278 139 14.8
28 140 95 321 225 17.17
32 160 108.8 417 291 22.43
34 170 115.6 544.74 272.37 25.32
36 180 122.4 610.7 305.35 28.3
38 190 129 680.45 340.23 31.6
40 200 136 753.96 376.98 35.04
42 210 143 831.24 415.62 38.65
44 220 150 912.29 456.15 42.4
46 230 156.4 997.11 498.56 46.34
48 240 163.2 1085.7 542.85 50.46
50 250 170 1178.06 589.03 54.75

buy drive chain

Buying a drive chain requires a certain understading of its characteristics. This article discusses the different types of chains available, including Silent, Flat-top, and Duplex. By the end of this article, you should have a basic understanding of what each type of chain is for. First, here are some basic rules to keep in mind when shopping for a chain. To find the drive chain that best suits your needs, read on.

roller chain

Choosing the right roller chain for your drive chain depends on several factors. First, you have to determine the motor horsepower and rpm for the small drive sprocket. These values ​​determine the size of the chain and the number of teeth on the drive sprocket. Next, you need to determine the size of the conveyor chain, it can be the horizontal, vertical, or curved radius. Depending on your specific needs, you can also choose between two-strand or three-strand chains.
The roller chain of the drive chain must be properly tensioned. It should also have a proper lubrication system. Chain sag should not exceed two to four percent of the center distance (the distance between the two axles). Also, it shouldn’t make any unusual noises or obvious problems. One of the main reasons for excessive wear is the size of the load. Each chain has a specified maximum working load.
The maximum roller chain load must be less than 1/9 or 6 times the tensile strength of the drive chain. This amount should not exceed this threshold, as exceeding this level will result in chain plate fatigue. To avoid this, you should use a roller chain with a higher number of strands. Also, for high power requirements, a roller chain with a higher number of strands is recommended. One final tip for choosing a drive chain: it should not be used when there is a high risk of corrosion or rusting.
The materials used to manufacture roller chains vary according to the specific application. Common materials include steel and stainless steel. However, stainless steel is used in food processing machinery and other environments that require lubrication. Brass and nylon are also sometimes used. These factors determine the selection of suitable materials for the drive chain. If you are not sure which material to use, you can consult an industry professional. These professionals will help you choose the right chain for the job at hand.
chain

mute chain

The design of the silent transmission chain is as follows: the large chain plates 2 are stacked one on top of the other in the direction of the chain length. The connecting rods are connected by connecting pins 3. The outermost and central guide plates 4 are fastened to the connecting pins 3 by means of rivets. This construction helps minimize friction on the sliding surfaces of the chain. Chainplate 2 of the silent transmission chain is usually made of stainless steel.
The link plates are made of steel and have a rectangular shape with pinholes 41. These guide plates have no teeth but have curved surfaces that guide the silent drive chain on the sprockets. In addition, the rear portion of the guide plate is higher than the portion of the chainplate. This feature improves pitch balance. The present invention is also applicable to silent transmission chains using rockers.
When it comes to chain design, it’s important to remember that silent drive chains are often used in automotive engines, especially timing and cam drives. This type of drive reduces noise and vibration due to its low engagement angle and links engagement with the sprocket. However, these applications are not limited to timing and cam drives; they can also be used for front-wheel power transmission. For example, silent drive chains are designed to resemble those used in NASCAR racing engines.
The design of the silent drive chain is based on the structure of the roller chain. Its components are standardized and manufactured according to pitch. There are single-row and multi-row versions. Quiet chains, also known as inverted tooth chains, are shaped to reduce noise from stretching. It’s also designed to minimize the amount of friction caused by small changes in pitch. Its teeth don’t slide against each other, so the chain is smoother and more durable.

flat top chain

One of the important parts of the flat top chainplate system is the hinge pin, which is used to fix the chainplate and is responsible for the smooth and efficient conveying of the chainplate. There are several types of hinge pins, including single hinge pins and double hinge pins. The single hinge pin is suitable for the chainplate with a small span and small bearing capacity, and the double hinge pin is suitable for the chainplate with a large span and high bearing capacity.
The side bending flat top chain is suitable for conveying large and medium workpiece pallets. They can be made of steel or plastic, each with its own advantages. Both chainplates are designed to convey material smoothly. Side curved flat-top chains can be used on straight conveyors. They have a low coefficient of friction and can transport weights up to 1.2 kg/cm. They can also be combined with HD profiles.
Flat top drive chains are usually made of plastic material and come in two types: tabletop chains and buffer chains. They come in a variety of widths, but the most popular are standard widths, ranging from 3.25 inches to 12 inches. MatTop chains are usually shipped in 10-foot lengths. They come in different styles, but they all have the same basic specs. Tabletop chains are designed for general conveying, while pad chains are used for specific applications. Solid top chains are suitable for conveying bulk materials, while wide pad chains can handle large volumes of fluids and/or solid-solid mixtures.
These chain conveyors can be used to convey, connect or lift small items. This type of chain is especially useful in industries where the product is hot or greasy. The modular design of these chains allows them to be configured in three dimensions, making them suitable for production changes and transitions. They also help reduce slack in the chain. Flat top chains are commonly used in final assembly and mechanical or paint restoration in the automotive industry.

double chain

Besides the roller chain, another type of chain drive is the double drive chain. This type of chain consists of a series of short cylindrical rollers connected together by side links and driven by gears called sprockets. This type of chain is very reliable and only requires a tractor with a high rpm PTO. It is manufactured by CZPT and is available in many different sizes and finishes.
chain

Self-lubricating chain

Self-lubricating drive chains are the ideal solution for applications that do not require the relubrication of conventional chains. This maintenance-free roller chain features fully heat-treated components that increase the chain’s fatigue resistance and strength. It’s sintered alloy bushings are oil-impregnated, reducing the chance of premature wear and elongation. Its self-lubricating properties enhance its durability and work well even in hard-to-reach places.
CZPT self-lubricating roller chains feature preloaded sintered steel bearing pins and oil-impregnated sintered bushings. These chains are drop-in replacements for standard roller chains and run on the same sprockets as standard chains. In addition to being maintenance-free, self-lubricating roller chains are compatible with most existing sprockets and are ideal for demanding applications.
The O-ring chain concept was used to develop self-lubricating systems. It has two or more annular grease storage chambers. A self-lubricating bushing roller chain has an oil reservoir between its pin chain and the roller chainplate. A grease seal between these two plates isolates the moving parts and keeps the joints well lubricated. O-rings are made of special nitrile rubber, whose properties vary by application.
CZPT SLR conveyor chains and CZPT SLR drive chains have rollers on sintered bushings. CZPT SLR chains and SLR conveyor chains are self-lubricating and have a higher working load than standard ANSI chains. They may not be interchangeable with other self-lubricating chains from other manufacturers. Self-lubricating drive chains are the best solution for demanding industrial applications requiring heavy-duty, reliable conveying.

China Galvanized Long Link Chain/Lifting Chain     manufacturer China Galvanized Long Link Chain/Lifting Chain     manufacturer
editor by czh 2023-01-01

Recent Posts